Can mop sink be in commercial kitchen?
Most commercial kitchen design projects will require at minimum 4 types of sinks. One mop sink, for obvious reasons. May be either floor mounted as in the image above, or similar in design to a utility room sink you might find in a residential building. These sinks are typically direct drained.
What is considered a mop sink?
Mop sink bowls allow users to rinse mops and to empty and clean mop buckets without splashing or injury. Bowls are mounted on or near the floor, which requires minimal lifting to dump buckets. These mop sink bowls include faucets and handles.
What is the height for ADA sink?
34”
Sinks. A sink should be mounted at a maximum 34” above the floor to the top rim with clear floor space underneath to allow for a forward approach. It is important to provide a knee clearance of 27” in height to the sink underside for at least an 8” depth.
Do I need 3 sinks in a commercial kitchen?
Even the smallest restaurant requires at least two sinks, and many establishments need three. Large commercial kitchens may have several. You need at least one double sink for washing and rinsing equipment. Those sinks should not be used for cleaning hands or equipment.
How big is a commercial mop sink?
Commercial Mop Sinks: What You Need to Know Commercial mop sinks typically are mounted on the floor and can be used to obtain water for cleaning and sanitizing. Janitor sinks range in size from 21 to 30.5 inches wide and 21 to 50.25 inches long, and their depths can vary, with some available in 6, 8, and 12 inches.
Is a service sink and mop sink the same?
Service sinks shall be a wall mounted or floor mounted mop sink with a minimum 3-inch (76 mm) outlet. Laundry trays and laundry sinks are prohibited for use as a service sink. The service sink shall not be located within the toilet facility and may be in a locked janitor closet.
Why are mop sinks required by code?
Mop sinks. Provide an approved janitorial sink with hot and cold water and backflow protection. The sink shall be located to prevent contamination of any food preparation areas, food storage areas, utensils, or equipment. A wall or enclosure may be required depending on location of the mop sink.
Can a mop sink be in a bathroom?
428.1 General. Service sinks shall be a wall mounted or floor mounted mop sink with a minimum 3-inch (76 mm) outlet. Laundry trays and laundry sinks are prohibited for use as a service sink. The service sink shall not be located within the toilet facility and may be in a locked janitor closet.
