How do I reset my Xerox toner cartridge?

Clear the Message and Reset the % Toner Remaining Value

  1. Press the [Login In / Out] button on the Control Panel.
  2. Select the [Keyboard] button on the Touch Screen.
  3. Enter the username using the keypad on the Touch Screen, and then select [Next].
  4. Enter the password, and then select [Done].

How do I make my printer accept compatible cartridges?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

Why is my new toner not working?

If your toner cartridges aren’t installed correctly, it can prevent your printer from functioning properly. Diagnosis: A toner cartridge is ajar, stuck inside the printer, or otherwise improperly inserted. The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge.

How do I install Xerox toner?

To Replace a Toner Cartridge:

  1. Open the front cover.
  2. Pull out the toner cartridge.
  3. Remove the new toner cartridge from the packaging.
  4. Slowly shake the new cartridge five or six times to distribute the toner evenly inside the cartridge.
  5. Hold the cartridge by the handle.
  6. Close the front cover.

How do I factory reset my Xerox workcentre 3025?

Reset the Printer to Factory Defaults

  1. Log in to the control panel as a System Administrator.
  2. Press the Home button.
  3. Touch Device > Resets.
  4. To reset the printer to factory defaults, touch Reset to Factory Defaults.
  5. At the confirmation message, touch Reset.

How do I reset my Brother printer after changing toner?

  1. Power on the Brother printer.
  2. Open the toner access door located at the front of the printer.
  3. Press the “Clear/Back” button.
  4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
  5. Press the “1” button to reset the toner cartridge display.

Why does my printer say incompatible cartridge?

Fix HP incompatible print cartridge error The “Incompatible Cartridge” message may signal you that the cartridge was placed in the wrong slot. In case you get such an error, make sure the cartridge model numbers match your printer model and your country/region.

How do I reset my printer after toner?

  1. Open the front cover of the printer.
  2. Press the Clear / Back button.
  3. Press the * button.
  4. Press the 0 button.
  5. Press the 0 button.
  6. Close the front cover.
  7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do I factory reset my Xerox 3345?

To restore your printer to factory default settings, perform the following steps:

  1. In Xerox® CentreWare® Internet Services, click Status→General.
  2. To restore the original network default settings, click Network Factory Default.
  3. To confirm, click OK.

Where is the toner located on a Xerox printer?

While the printer is powered on, replace the toner cartridge. Open the toner cover, located just above the front cover.