How do you take the prop off a Motorguide trolling motor?
Pull the propeller straight off. If the prop is struck, grasp one blade with one hand and tap lightly on the backside of the opposite blade with a rubber mallet. If necessary, repeat the procedure on all blades until the propeller comes off.
Why is my Minn Kota trolling motor not working?
The top six reasons why your electric troller motor is not working include battery failure, loose wires, an issue with the circuit breaker, or faulty wire connections. The problem could also be due to a broken rotary switch or a fault in the propeller. Luckily, most of these can be fixed at home.
Which way should a trolling motor prop turn?
You can tell by looking at the way the prop is made to pull in the water. It is correct. Motor turn counter clockwise to to move forward. If the wires on the plug or battery were wrong it would not run at all.
Does a trolling motor need a battery?
For all 12V trolling motors you need a battery from the AV-line (the blue batteries) between 35Ah and 140Ah. > For all 24V motors you require a 24V battery (the white batteries): the 24V50 or the 24V100. The AV-line batteries can be used with every 12V electric outboard or trolling motor.
Are Minn Kota and MotorGuide props the same?
Minn Kota uses less rpms and more pitch/blade area to provide thrust. Motorguide uses less pitch and less blade area but higher rpms…
How to solve trolling motor problems and maintenance?
Simple Trolling motor trouble shooting and maintenance can be carried out by beginners, tasks like cleaning connections, checking batteries and clearing the propeller are suitable for beginners. However, when tasks like rebuilds or wiring issues occur it is safer and more effective use professional help.
How do you hook up a trolling motor?
When it is time to pull up the motor, again you must pull the cable backwards to release the locking pin. Pull the trolling motor out of the water and place it back in its initial, flat position. You should here the locking pin click into place and at this point your trolling motor should be secured for travel.
Where is the directional arrow on a trolling motor?
Most all of today’s trolling motors have a directional arrow on the head of the trolling motor. This indicates the direction the motor will take the boat if the trolling motor is turned on. If you are first time user, get a feel for how much pressure you need to apply on the steering pedal to get the boat to go a certain direction.
Where is the master power switch on a trolling motor?
Most motors have a master power switch located somewhere on the foot pedal. Make sure this switch is in the ON position. Additionally, the speed dial on the foot pedal must also be turned to a speed setting and away from the OFF position. Most all of today’s trolling motors have a directional arrow on the head of the trolling motor.
How deep should I Set my trolling motor?
This depth will vary depending upon how wavy it is. If you set the motor too deep, you run a greater risk of hitting objects, fouling the prop on weeds, and tearing up the prop and/or bending the shaft. Yep. I usually keep mine a little deeper than it needs to be so when the wind picks up I don’t have to mess with it.
Do you have to lubricate a MotorGuide trolling motor?
Trolling motors are mostly sealed, but MotorGuide recommends periodically lubricating the motor at pivot and rub points. By keeping the motor lubricated, you can avoid corrosion and keep your MotorGuide trolling motor operating smoothly. The company was formed in the mid-1960s, and their first trolling motor was the Guide-Rite.
What are the characteristics of a good trolling motor?
Persistence and versatility are the defining characteristics of great fishermen and great trolling motors. MotorGuide freshwater models provide reliable performance for a wide range of fishermen, boats and fishing styles. MotorGuide delivers the freedom to fish further.
When did the first MotorGuide motor come out?
By keeping the motor lubricated, you can avoid corrosion and keep your MotorGuide trolling motor operating smoothly. The company was formed in the mid-1960s, and their first trolling motor was the Guide-Rite. In the later part of the decade, it was rebranded MotorGuide.
