What is RO on steering wheel?
the R resets the cruise control to the previous speed before it was de-activted (by pressing the brake / clutch) 2. The 0 also switches the Cruise Control off. 3.
How do you adjust the steering wheel on a Renault Clio?
Depending on the year of manufacture of your Renault Clio 4 and its options, you can adjust height and depth of the steering wheel. To do this, just pull the lever positioned on the central column or below the steering wheel. Then adjust it up or down but also in depth.
How do you turn the airbag off on a Renault Clio 2007?
To deactivate the airbag: stationary vehicle, ignition off, push and turn lock 1 to the OFF position. With the ignition on, you must check that the warning light ¹ is lit on the display 2. This light remains permanently lit to let you know that you can fit a child seat.
How do you remove the fusion airbag?
Locate the small holes on both sides of the back of the steering wheel. Place the 3-mm hex-head key into one of the holes and push it in firmly. This is going to pop out the airbag from one side of the steering wheel.
What does R and O do on Renault steering wheel?
Registered. The switch on the left is marked + and – is to increase or decrease speed when using cruise control or speed limiter, and the switch on the right marked R and O is for switching the cruise control or speed limiter off and on when necessary as it keeps the speed set in memory. Hope this helps.
What is the lever under the steering wheel?
tilt adjustment lever
The tilt adjustment lever on the underside of the steering column allows you to tilt the steering wheel.
How do you turn on the passenger airbag in a Renault Clio?
To reactivate the airbag: with the vehicle stoppedand the ignition off, push and turn lock 1 to the ON position. With the ignition switched on, you must check that the warning light ¹ is out and that the warning light comes on the display 2 after each start-up for around 60 seconds.
How do you remove an airbag from the steering wheel?
Remove the Airbag. Mounting Bolts Start by switching the ignition button to the on position so you can unlock the steering wheel lock mechanism. Rotate the steering wheel 90 degrees either way and locate the steering wheel mounting bolts access holes in the plastic housing and loosen the bolts.
Where is the steering wheel adjustment lever located?
The lever to tilt the steering wheel is under the steering column to the left. Push this lever all the way down.
