Why is my washer flashing LD?
A Whirlpool washer that displays an “LD” error is indicating that there is an issue with “long draining.” This means that the washer is taking too long to drain the water from the drum. The most logical reason for this is a malfunction in the pump. You can also confirm that the pump is bad with a second method.
What does LLD mean on a washer?
My manual says it is a Long Drain issue. I have checked all the hoses going into and out of the machine.
What does Ld mean on my Maytag washer?
mamajtown, Ld code is for Long Drain: this could indicate that the washing machine is taking longer than 5 minutes to drain out enough water to reset the water pressure switch.
What does Ld mean on Kenmore Oasis Washer?
long drain
LD means “long drain” and can be displayed if the drain pump in not working or if something is under the wash basket. The drain pump must work. If the water is not draining out then the pump can be blocked or just bad.
What does Ld mean on a Samsung washer?
Long Drain
Samsung Ld – Long Drain.
How do you reset the code LD on a top Whirlpool Cabrio Platinum?
Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.
Why is my Maytag washer not draining?
Drain Hose Is Obstructed An obstructed drain hose is one of the most common reasons a Maytag washer won’t drain. Both kinks and blockages can obstruct the hose, preventing proper draining. A kinked hose can be gently straightened to restore function.
How do I clear the error code on my Kenmore washer?
How to Reset the FH Error Code on a Kenmore Elite Washing Machine
- Look for the “Pause/Cancel” button on the washer control panel.
- Press the “Pause/Cancel” button twice to cancel the wash cycle.
- Connect the water supply hoses back to the washer and turn on the water spigots.
How do I fix the error code on my Kenmore washer?
Ld flashes when the water level does not change after the drain pump is on. You should be able to reset the washer by pressing the STOP button.
